Power split transmission PTO
VMG 1700
1700 Nm
DOWNLOAD DATA SHEET
Details – Transmission configuration
| Nominal input power | 150 kW (200 hp) |
| Maximum input power | 170 kW (230 hp) |
| Nominal input speed | 1000 rpm |
| Maximum input speed | 1050 rpm |
| Rated input torque | 1430 Nm |
| Max input torque | 1800 Nm |
| Max output torque | 4700 Nm |
| Max output speed | 1500 rpm |
| Transmission ratios | ∞ to 0.67 |
| Hydropump/motor | Bosch Rexroth A4VG065 / A6VN085 |
| Control Unit | Bosch RC30 |
| Electronic interface | CAN-J1939 |
| Dry weight | 307 kg |
Special advantages:
- Wear-free variator system
- Stepless adjustment of the output speed from standstill to maximum speed
- Very low torque on the input shaft during acceleration – no wear on the PTO clutch
- Automatic adjustment of the transmission ratio if the output shaft is overloaded
- Fully automatic changeover from infinite to minimum transmission ratio
- Maximum efficiency due to low variator power requirement in the main operating ranges
- “Overdrive function” available
Shredder
VTP1500
1500 Nm
Details – Transmission version
VTP1500 – Variable drive system for shredders
The proven power splitting technology in a new application – VMG1500 for driving shredder shafts!
This increases the efficiency of your machines by more than 20% compared to hydrostatic drives!
The speed of the shredder shaft is infinitely variable, with optimum efficiency and wear-free acceleration. The shredder shafts are started up and reversed purely hydrostatically. Switching to power-split operation takes place at synchronous speed without interrupting the drive power.
At the main operating point, the shredder shafts are driven purely mechanically, thus achieving the best efficiency!
A quick-stop function is integrated via adjustable slipping torques on the multi-plate clutches.
| VTP1500 | H1F Shredder |
| Rated input speed | 1800 to 2100 rpm |
| Rated input torque | 1500 Nm (1110ft-lbs) |
| Max output torque (output fo final planetary gears) | 8800 Nm (6500 ft-lbs) |
| Rated input power | 260 kW (350 hp) |
| Transmission ratios (output to final planetary gears)*) | – 5.73 to to 1.99 fwd |
| Hydropump / Hydromotor | e.g. Bosch Rexroth A4VG110 / A6VM115 or Compact unit 110/90 |
| PTO | i = 0,69 |
